SMC Networks 8724ML3 - annexe 1, Management Manual

Page: 693 / 820

Q
UALITY OF
S
ERVICE
C
OMMANDS
4-293
service-policy
This command applies a policy map defined by the policy-map command to
the ingress queue of a particular interface. Use the no form to remove the
policy map from this interface.
Syntax
[ no ] service-policy input policy-map-name
• input - Apply to the input traffic.
• policy-map-name - Name of the policy map for this interface.
(Range: 1-32 characters)
Default Setting
No policy map is attached to an interface.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• You can only assign one policy map to an interface.
• You must first define a class map, set an ACL mask to match the criteria
defined in the class map, then define a policy map, and finally use the
service-policy command to bind the policy map to the required
interface.
Example
This example applies a service policy to an ingress interface.
Console(config)#interface ethernet 1/1
Console(config-if)#service-policy input rd_policy
Console(config-if)#