SMC Networks 8724ML3 - annexe 1, Management Manual

Page: 412 / 820

C
OMMAND
L
INE
I
NTERFACE
4-12
Command Groups
The system commands can be broken down into the functional groups
shown below
.
Table 4-4 Command Group Index
Command Group Description Page
Line Sets communication parameters for the serial port and
Telnet, including baud rate and console time-out 4-14
General Basic commands for entering privileged access mode,
restarting the system, or quitting the CLI 4-26
System
Management Controls system logs, system passwords, user name,
browser management options, and a variety of other
system information 4-32
Flash/File Manages code image or switch configuration files 4-83
Authentication Configures logon access using local or remote
authentication; also configures port security and IEEE
802.1X port access control 4-91
Access Control List Provides filtering for IP frames (based on address,
protocol, TCP/UDP port number or TCP control code)
or non-IP frames (based on MAC address or Ethernet
type)
4-114
SNMP Activates authentication failure traps; configures
community access strings, and trap managers
4-139
DHCP Configures DHCP client, relay and server functions 4-157
DNS Configures DNS services. 4-177
Interface Configures the connection parameters for all Ethernet
ports, aggregated links, and VLANs 4-186
Mirror Port Mirrors data to another port for analysis without
affecting the data passing through or the performance of
the monitored port 4-200
Rate Limiting Controls the maximum rate for traffic transmitted or
received on a port 4-203
Link Aggregation Statically groups multiple ports into a single logical trunk;
configures Link Aggregation Control Protocol for port
trunks 4-204