SMC Networks 8724ML3 - annexe 1, Management Manual

Page: 495 / 820

A
UTHENTICATION
C
OMMANDS
4-95
radius-server host
This command specifies primary and backup RADIUS servers and
authentication parameters that apply to each server. Use the
no form to
restore the default values.
Syntax
[ no ] radius-server index host { host_ip_address | host_alias }
[ auth-port auth_port ] [ timeout timeout ] [ retransmit retransmit ] [ key key ]
• index - Allows you to specify up to five servers. These servers are
queried in sequence until a server responds or the retransmit period
expires.
• host_ip_address - IP address of server.
• host_alias - Symbolic name of server. (Maximum length: 20 characters)
• port_number - RADIUS serverUDP port used for authentication
messages. (Range: 1-65535)
• timeout - Number of seconds the switch waits for a reply before
resending a request. (Range: 1-65535)
• retransmit - Number of times the switch will try to authenticate logon
access via the RADIUS server. (Range: 1-30)
• key - Encryption key used to authenticate logon access for client. Do
not use blank spaces in the string. (Maximum length: 20 characters)
Default Setting
• auth-port - 1812
• timeout - 5 seconds
• retransmit - 2
Command Mode
Global Configuration
Example
Console(config)#radius-server 1 host 192.168.1.20 port 181 timeout 10
retransmit 5 key green
Console(config)#