DHCP C
OMMANDS
4-173
• The
no host
command only clears the address from the DHCP server
database. It does not cancel the IP address currently in use by the host.
Example
Related Commands
client-identifier (4-173)
hardware-address (4-174)
client-identifier
This command specifies the client identifier of a DHCP client. Use the
no
form to remove the client identifier.
Syntax
client-identifier
{
text
text
|
hex
hex
}
no client-identifier
•
text
- A text string. (Range: 1-15 characters)
•
hex
- The hexadecimal value.
Default Setting
None
Command Mode
DHCP Pool Configuration
Command Usage
• This command identifies a DHCP client to bind to an address specified
in the
host
command. If both a client identifier and hardware address are
configured for a host address, the client identifier takes precedence over
the hardware address in the search procedure.
• BOOTP clients cannot transmit a client identifier. To bind an address to
a BOOTP client, you must associate a hardware address with the host
entry.
Console(config-dhcp)#host 10.1.0.21 255.255.255.0
Console(config-dhcp)#
Summary of Contents for 8724ML3 - annexe 1
