VLAN C
ONFIGURATION
3-189
Command Attributes
•
Current
– Lists all the current VLAN groups created for this system. Up
to 255 VLAN groups can be defined. VLAN 1 is the default untagged
VLAN.
•
New
– Allows you to specify the name and numeric identifier for a new
VLAN group. (The VLAN name is only used for management on this
system; it is not added to the VLAN tag.)
•
VLAN ID
– ID of configured VLAN (1-4093).
•
VLAN Name
– Name of the VLAN (1 to 32 characters).
•
Status
(Web) – Enables or disables the specified VLAN.
-
Enable
: VLAN is operational.
-
Disable
: VLAN is suspended; i.e., does not pass packets.
•
State
(CLI) – Enables or disables the specified VLAN.
-
Active
: VLAN is operational.
-
Suspend
: VLAN is suspended; i.e., does not pass packets.
•
Add
– Adds a new VLAN group to the current list.
•
Remove
– Removes a VLAN group from the current list. If any port is
assigned to this group as untagged, it will be reassigned to VLAN
group 1 as untagged.
Web
– Click VLAN, 802.1Q VLAN, Static List. To create a new VLAN,
enter the VLAN ID and VLAN name, mark the Enable checkbox to
activate the VLAN, and then click Add.
Figure 3-78 VLAN Static List - Creating VLANs
Summary of Contents for 8724ML3 - annexe 1
