SMC Networks 8724ML3 - annexe 1, Management Manual

Page: 465 / 820

S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-65
Example
The following example shows the event message stored in RAM.
SMTP Alert Commands
These commands configure SMTP event handling, and forwarding of alert
messages to the specified SMTP servers and email recipients.
logging sendmail host
This command specifies SMTP servers that will be sent alert messages. Use
the
no form to remove an SMTP server.
Syntax
[ no ] logging sendmail host ip_address
ip_address - IP address of an SMTP server that will be sent alert
messages for event handling.
Console#show log ram
[1] 00:01:30 2001-01-01
"VLAN 1 link-up notification."
level: 6, module: 5, function: 1, and event no.: 1
[0] 00:01:30 2001-01-01
"Unit 1, Port 1 link-up notification."
level: 6, module: 5, function: 1, and event no.: 1
Console#
Table 4-21 SMTP Alert Commands
Command Function Mode Page
logging sendmail host SMTP servers to receive alert messages GC 4-65
logging sendmail
level Severity threshold used to trigger alert
messages GC 4-66
logging sendmail
source-email Email address used for “From” field of alert
messages GC 4-67
logging sendmail
destination-email Email recipients of alert messages GC 4-68
logging sendmail Enables SMTP event handling GC 4-68
show logging
sendmail Displays SMTP event handler settings NE,
PE 4-69