IP R
OUTING
C
OMMANDS
4-331
Example
This example sets the interface version for VLAN 1 to receive RIPv1
packets.
Related Commands
version (4-328)
ip rip send version
This command specifies a RIP version to send on an interface. Use the
no
form to restore the default value.
Syntax
ip rip send version
{
none
|
1
|
2
|
v2-broadcast
}
no ip rip send version
•
none
- Does not transmit RIP updates.
•
1
- Sends only RIPv1 packets.
•
2
- Sends only RIPv2 packets.
•
v2-broadcast
- Route information is broadcast to other routers with
RIPv2.
Command Mode
Interface Configuration (VLAN)
Default Setting
The default depends on the setting specified with the
version
command:
• Global RIPv1 - Route information is broadcast to other routers with
RIPv2
• Global RIPv2 - RIPv2 packets
Command Usage
• Use this command to override the global setting specified by the RIP
version
command.
Console(config)#interface vlan 1
Console(config-if)#ip rip receive version 1
Console(config-if)#
Summary of Contents for 8724ML3 - annexe 1
