P
RIORITY
C
OMMANDS
4-277
Command Usage
The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
Example
The following example shows how to enable TCP/UDP port mapping
globally:
map ip port
(Interface Configuration)
This command sets IP port priority (i.e., TCP/UDP port priority). Use the
no
form to remove a specific setting.
Syntax
map ip port
port-number
cos
cos-value
no map ip port
port-number
•
port-number
- 16-bit TCP/UDP port number. (Range: 0-65535)
•
cos-value
- Class-of-Service value (Range: 0-7)
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
• The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
• This command sets the IP port priority for all interfaces.
Example
The following example shows how to map HTTP traffic to CoS value 0:
Console(config)#map ip port
Console(config)#
Console(config)#interface ethernet 1/5
Console(config-if)#map ip port 80 cos 0
Console(config-if)#
Summary of Contents for 8724ML3 - annexe 1
