SMAR MB-700, User Manual

Page: 47 / 116

MB-700 Function Blocks
4.9
Idx Parameter
Data Type
(Length)
Valid Range/
Options
Default
Value
Unit
Store/
Mode
Description
120
P_EU_ADDRESS_A
1
DS-265
S /
OOS
Information to locate percentage variable
as well scaling conversion.
… … … … … … … …
147
P_EU_ADDRESS_A
28
DS-265
S /
OOS
Information to locate percentage variable
as well scaling conversion.
148
P_EU_ADDRESS_B
1
DS-265
S /
OOS
Information to locate percentage variable
as well scaling conversion.
… … … … … … … …
175
P_EU_ADDRESS_B
28
DS-265
S /
OOS
Information to locate percentage variable
as well scaling conversion.
176 F_ADDRESS1 Unsigned16 65535
S /
OOS
Modbus address to locate float variable
… … … … … … … …
191 F_ADDRESS16 Unsigned16 65535
S /
OOS
Modbus address to locate float variable
192 UPDATE_EVT DS-73 Na D
This alert is generated by any change to
the static data.
193 BLOCK_ALM DS-72 Na D
The block alarm is used for all
configuration, hardware, connection failure
or system problems in the block. The
cause of the alert is entered in the
subcode field. The first alert to become
active will set the Active status in the
Status attribute. As soon as the
Unreported status is cleared by the alert
reporting task, another block alert may be
reported without clearing the Active status,
if the subcode has changed.
Table 4.3 - Legend: Store / Mode Column – Store: data storage (D – Dynamic; S – Static; N – Non volatile) / Mode: minimal necessary mode
for user modify the parameter (OOS – Out of Service, MAN - Manual); If the mode column is empty indicates that the parameter does not
depends on the mode to be modified. RO – Read Only; Unit Column - E – Enumerated parameter; Na – Dimensionless Parameter.