SMAR MB-700, User Manual

Page: 73 / 116

Adding Modbus to the MB-700
5.17
CCSM Block
Index Parameter DataType
Modbus Address
(Strategy = x)
Offset_SM = 200 * x
x = 0 ~ 24
Modbus Address
Strategy= 0
Offset_sm = 0
Modbus Address
Strategy= 1
Offset_Sm = 200
Modbus Address
Strategy = 2
Offset_Sm = 400
10 SCAN_STATUS UInteger16 42001 + Offset_SM 42001 42201 42401
11.1 BVALUE[1] Bool 2001 + Offset_SM 2001 2201 2401
11.2 BVALUE[2] Bool 2002 + Offset_SM 2002 2202 2402
11.96 BVALUE[96] Bool 2096 + Offset_SM 2096 2296 2496
12.1 IVALUE[1] Integer32
42002-42003 +
Offset_SM
42002-42003 42202-42203 42402-42403
12.2 IVALUE[2] Integer32
42004-42005 +
Offset_SM
42004-42005 42204-42205 42404-42405
12.8 IVALUE[8] Integer32
42016-42017 +
Offset_SM
42016-42017 42216-42217 42416-42417
13.1 P_EU_VALUE_A[1] Float
42018-42019 +
Offset_SM
42018-42019 42218-42219 42418-42419
13.2 P_EU_VALUE_A[2] Float
42020-42021 +
Offset_SM
42020-42021 42220-42221 42420-42421
13.28 P_EU_VALUE_A[28] Float
42072-42073 +
Offset_SM
42072-42073 42272-42273 42472-42473
14.1 P_EU_VALUE_B[1] Float
42074-42075 +
Offset_SM
42074-42075 42274-42275 42474-42475
14.2 P_EU_VALUE_B[2] Float
42076-42077 +
Offset_SM
42076-42077 42276-42277 42476-42477
14.28 P_EU_VALUE_B[28] Float
42128-42129 +
Offset_SM
42128-42129 42328-42329 42528-42529
15.1 FVALUE[1] Float
42130-42131 +
Offset_SM
42130-42131 42330-42331 42530-42531
15.2 FVALUE[2] Float
42132-42133 +
Offset_SM
42132-42133 42332-42333 42532-42533
15.16 FVALUE[16] Float
42160-42161 +
Offset_SM
42160-42161 42360-42361 42560-42161
Table 5.2 – Modbus Address Table of the MB-700 working as Modbus Slave
Using the Data Logger
Description
The MB-700 may store data Logs from a LC700 Data Logger Block (FIFO). So, during normal
reading of the Concentrate Data Logger it checks if there are data stored in the correspondent slave.
In case there are data stored it will read these data and clear the log buffer of the slave.
Configuration
First create a FIFO Block in the LC700. In the SYSCON configuration it is possible to include as
many Concentrate Data Logger Blocks as it is required. To insert a CCDL Block just proceed like it
was done to the other MB-700 Blocks.
NOTE : the amount of CCDL blocks depends on the FIFO size defined in the LC700 (FIFO Size).
Each CCDL supports up to 280 data samples. For example, if the FIFO size is 1000 registers and
the data type is integer (percentage) so it is necessary: 1000/280 = 4 CCDL blocks.