SMAR MB-700, User Manual

Page: 107 / 116

Appendix C
C.1
SPECIFICATIONS FOR MB-700
Technical Specifications
CONTROLLER
Type 32 Bit RISC (CPU Clock @25 MHz)
Performance 50 MIPS
Code Memory 2 Mbytes, 32 Bits Flash Memory (Firmware recordable)
Data Memory 2 Mbytes, 32 Bits NVRAM (Data storage and configuration)
COMMUNICATION PORTS
Ethernet 1 Ethernet port @10 Mbits (Connector RJ-45)
Serial 1 EIA-232 port @ 9.6 Kbps-115,2 Kbps (Connector RJ11)
1 EIA-485 port @ 9.6 Kbps-115,2 Kbps
Synchronism channel 1 Independent port with DMA-Baudrate 31,25 Kbps (SYNC)
INTERNAL POWER
Suppied by the IMB 5Vdc/ 950 mA
Total dissipation 4.75 W
STATUS INDICATION
+5VDC Green LED indicating Module Powering
Fail Red LED indicating processor failure
Run Green LED indicating program running
Hold Yellow LED indicating program in FORCE
Force Not used
232/485 TX Green LED indicating data transmission (serial EIA-232 and EIA-485)
ETH 10 Green LED indicating Ethernet cable connected
ETH TX Green LED indicating data transmission through Ethernet
SYNC Green LED indicating data synchronism
Standby Green LED indicating the module is in standby (waiting state when it is
redundant)
DIMENSIONS AND WEIGHT
Dimensions
(W x H X D) 39.9 x 137.0 x 141.5 (mm)
1.57 x 5.39 x. 5.57 (in.)
Weight 0.340 kg
TEMPERATURE
Operation 0 ºC to 60 ºC
Storage -30 ºC to 70 ºC
CABLES
One Wire 14 AWG (2 mm
2
)
Two Wires 20 AWG (0.5 mm
2
)