SMAR MB-700, User Manual

Page: 70 / 116

MB-700 – User’s Manual
5.14
Figure 5.15 - Setting the BYPASS_DIRECTION Parameter in the CCCF Block
The configuration of the Modbus Slaves in the CCCF Block follows the steps below:
•
If the configuration has only one a Modbus slave for a determined IP address, the
parameter SLAVE_ADDRESSES must be used. In this case, for each IP_SLAVE it has a
corresponding MODBUS_ADDRESS_SLAVE.
Figure 5.16 - Setting the Modbus Slaves in the CCCF Block