SMAR MB-700, User Manual

Page: 75 / 116

Adding Modbus to the MB-700
5.19
Figure 5.20 – CCDL of the MB-700 Interaction with LC700
Putting CCDL Blocks in Cascade
In case the amount of stored data is bigger than it is supported by the CCDL block user might put
CCDL blocks in cascade, it is only necessary to repeat the same configuration to all the data logger
blocks. In this way, the MB-700 will start to use blocks according to the order of instantiation
indicating which is the next block stored through the parameter NEXT_BLOCK_LOG.
Modbus Address
FIFO_LOAD
= 2009
Modbus Address
FIFO_EMPTY
= 0002
FIFO1.CTW 42506
FIFO1.SIZE 42507
FIFO1.TRIGGER 42508
: :
Modbus Address
FIFO_CLEAR
= 2011