Skoda Fabia II 2007, Workshop Manual

Page: 53 / 165

– The support -2- must be located on the actuating rod -1- of the
master cylinder.
– Press the support -2- into the recess on the clutch pedal -3-
until it clicks audibly into place.
– Press on the clutch pedal slightly and insert a new bearing bolt.
– Position the bolts -A- horizontally.
– Turn the bearing bolt to the right -in direction of arrow-, for this
purpose use the hexagon socket wrench -1-, wrench size
8 mm.
• The catches -B- must click audibly into place.
Then the bolts -A- are positioned vertically.
– Install bracket without master cylinder
⇒ page 44 .
1.15 Removing and installing the clutch pedal
with the tension spring (Fabia II 2011 ►;
Roomster 2011 ►; Rapid NH 2013 ►)
Note
♦
Install the clutch pedal with a new bearing bolt.
♦ If only the tension spring is removed, pay attention
⇒ page 51 .
Special tools and workshop equipment required
♦ Hook - 3438-
♦ Pliers - T10005-
♦ Allan key, wrench size 8 mm, commercially available
Removing
– Removing the footwell vent ⇒ Heating and Air Conditioning;
Rep. gr. 87 .
– If present, remove crash strut ⇒ page 32 .
– Remove clutch pedal switch - F36- ⇒ page 31 .
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
49