Skoda Fabia II 2007, Workshop Manual

Page: 57 / 165

11 - Support
❑ holds the tube-hose line -Pos. 9- on the gearbox
❑ not fitted to all vehicles
12 - 20 Nm
13 - Locking clip
❑ to remove the tube-hose line -Pos. 9- pull out of the slave cylinder -Pos. 16- up to the stop
14 - Dust cap
15 - Vent valve
❑ Bleeding the clutch control ⇒ page 65
16 - Slave cylinder
❑ removing and installing ⇒ page 61
❑ after installing, bleed the clutch control ⇒ page 65
17 - Gearbox
Lift off the support -A- in -the direction of the arrow-.
Push the actuator rod/master cylinder in the support -A- in
-direction of the arrow-.
Difference between the O-rings
Pos. Version of line connection
-1- Line connection with round slot -arrow 1-
-2- Line connection with shoulder -arrow 2-
-3- Line connection with shoulder -arrow 2- and with
round slot -arrow 3-
• In case of a line connection with round slot -arrow 1- and
-arrow 3-, O-rings must be inserted into the slots.
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
53