– Unscrew the cover -arrow- for the gearbox housing.
– Pull out the bearing bolt -1- for the 5th gear shift fork -2- and
remove gearshift fork.
– Remove circlip -3- for 5th gear synchronizer body.
– Remove circlip -4- for 5th gear pinion.
– Remove gear pinions and 5th gear synchronizer body.
– Release the fixing screws -A- for the bearing support of the
drive shaft and output shaft.
– Unscrew nut -B- for the reverse gear shift fork.
– Remove left flange shaft -C-.
– Turn the gearbox in the assembly stand so that the clutch
housing is at the top.
– Release the connecting screws for the clutch housing and the
gearbox housing.
– Carefully release the clutch housing from the projecting hous‐
ing lands and make sure the sealing surfaces are not damaged
in the process.
Note
When removing, pay attention that the clutch housing does not tilt
so that the roller bearings of the drive shaft and the output shaft
do not get damaged.
– Remove the differential gear from the gearbox housing.
On gearboxes of vehicles with the start-stop system
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
120
