Skoda Fabia II 2007, Workshop Manual

Page: 46 / 165

– Unscrew the two lower fixing nuts -arrows-.
– Remove the bracket -A- from the front wall -B-.
1.10.2 Install
Installation is performed in the reverse order, pay attention to the
following points:
Note
Position self-locking nuts -1- and -2- for bracket -3- on front wall
and tighten.
– Connect the connector to the clutch pedal switch - F36- .
– Install the footwell vent ⇒ Heating and Air Conditioning; Rep.
gr. 87 .
– Press in tube-hose line -C- onto the connection of the master
cylinder, until the locking clip -B- is heard to click into position.
– Fit return hose -A- on the master cylinder.
– For checking, pull on the line.
– Bleed the clutch control
⇒ page 65 .
Tightening torques
Bracket/clutch pedal to front wall
1)
⇒ page 36 -Position 4-
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
42