– Fit the washer - T10083/1- onto the drive shaft and carefully
press in the bearing support together with the drive shaft and
the output shaft up to the stop.
– Carefully press on the bearing support with the drive and out‐
put shaft up to the arrester.
– Screw in screw -A- for reverse shaft support.
– Install the bearing pins -B- at the bottom of the gearbox.
– Screw on the reversing lights switch - F4- -C-.
– Install the bearing pins -B- at the top of the gearbox.
– Put the gearshift forks into Neutral.
– Apply sealant - AMV 188 200 03- uniformly on the sealing sur‐
faces of the cover.
– Install the gearshift shaft with cover -A-. Tighten screws
-arrows-.
On gearboxes of vehicles with the start-stop system
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
4. Disassembling and assembling the gearbox
123
