– Remove Bowden cable support -arrows-.
– Tie up shift cable and selector cable.
– Pull the tube-hose line -A- out of the bracket -B- (if present) on
the gearbox.
– Remove slave cylinder -B-, lay aside and secure with wire. Do
not open line system.
Note
Do not depress the clutch pedal.
Vehicles with petrol engines
– Unplug connector -arrow- from speedometer sender - G22- (if
available).
Vehicles with diesel engines
– Unplug connector -arrow- from speedometer sender - G22- (if
available).
Continued for all vehicles
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
2. Removing and installing the gearbox
101
