6
EN
6. Assembly
- 39 -
951-171-010
Version 06
Setting of the ON/OFF mode Fig. 18
1
ON
2 3 4 5 6 7 8
1
0
9
Cover plate Fig. 17
2.1
2
6.6
Confi guration of the EDL1
The EDL1 has 3 operating modes. These facilitate an adaptation to the different operating conditions.
6.7 ON/OFF mode
To set the ON/OFF mode proceed as follows:
• Unscrew the screws (2.1) and keep them
for future use.
• Remove the cover plate (2).
ATTENTION
Damage to the pcb is possible by slipping
off with an inappropriate adjusting tool.
Ensure that the adjusting tool is firmly
seated in the respective DIP switch.
The positions of DIP switches
1-5 and 8 are not relevant for
this operating mode.
6.8 Setting the ON/OFF mode
• Bring DIP switch 7 into position 0.
6.9 Adjusting the output volume
• Bring DIP switch 6 into position 1 or 0,
as desired.
Position 1 = approx. 1.0 ccm/ stroke
Position 0 = approx. 0.5 ccm/ stroke
• Reinstall the cover plate (2).
6.10 Machine contact mode
To set the mode proceed as follows:
