9
EN
9. Cleaning
- 45 -
951-171-010
Version 06
9. Cleaning
WARNING
Electric shock
Carry out cleaning works only on depressurized products that have been disconnected from the power supply. Do not touch cables
or electrical components with wet or damp hands.
Use steam-jet cleaners or high-pressure cleaners only in accordance with the IP protection class of the pump. Otherwise electrical
components may be damaged.
Cleaning execution, required personal protective equipment, cleaning agents and devices following the valid operational regulations
of the operator.
9.1 Cleaning agents
Cleaning agents compatible with the mate-
rial may be used only (materials, see chap-
ter 2.3).
Thoroughly remove residues of
cleaning agents from the product
and rinse off with clear water.
9.2 Exterior cleaning
Make sure to keep the reser-
voir closed during the cleaning
procedure.
• Mark and secure wet areas.
• Keep unauthorized persons away.
• Thorough cleaning of all outer surfaces
with a damp cloth.
9.3 Interior cleaning
Normally, interior cleaning is not required.
Should incorrect or contaminated lubricant
have been filled, inside cleaning of the prod-
uct will be required.
To do so, contact the SKF Customer Service.
