1
- 9 -
951-171-010
Version 06
EN
1. Safety instructions
1. Safety instructions
1.1 General safety instructions
○
The owner must ensure that safety in-
formation has been read by any persons
entrusted with works on the product
or by those persons who supervise or
instruct the before-mentioned group of
persons. In addition, the owner must also
ensure that the relevant personnel are
fully familiar with and have understood
the contents of the Instructions. It is
prohibited to commission or operate the
product prior to reading the Instructions.
○
These Instructions must be kept for fur-
ther use.
○
The described products were manufac-
tured according to the state of the art.
Risks may, however, arise from a usage
not according to the intended purpose
and may result in harm to persons or
damage to material assets.
○
Any malfunctions which may affect safety
must be remedied immediately. In addi-
tion to these Instructions, general statu-
tory regulations for accident prevention
and environmental protection must be
observed.
1.2 General behaviour when handling the
product
○
The product may only be used in aware-
ness of the potential dangers, in proper
technical condition, and according to the
information in these instructions.
○
Familiarize yourself with the functions
and operation of the product. The speci-
fied assembly and operating steps and
their sequences must be observed.
○
Any unclear points regarding proper
condition or correct assembly/ operation
must be clarified. Operation is prohibited
until issues have been clarified.
○
Keep unauthorized persons away.
○
Wear personal protective equipment
always.
○
Precautionary operational measures and
instructions for the respective work must
be observed.
○
Responsibilities for different activities
must be clearly defined and observed.
Uncertainty seriously endangers safety.
○
Safety-related protective and emergency
devices must not be removed, modified
or affected otherwise in their function
and are to be checked at regular intervals
for completeness and function.
○
If protective and safety equipment has to
be dismantled, it must be reassembled
immediately after finishing the work, and
then be checked for correct function.
○
Remedy occurring faults in the frame of
responsibilities. Immediately inform your
superior in the case of faults beyond your
competence.
○
Never use parts of the centralized lu-
brication system or of the machine as
standing or climbing aids.
