1
- 17 -
951-171-010
Version 06
EN
1. Safety instructions
1.21 Residual risks
Residual risk
Possible in life cycle Prevention/ remedy
Personal injury/ material damage due to
falling of raised parts
A B C
G H K
Keep unauthorized persons away. No people may remain under suspended loads. Lift
parts with adequate lifting devices.
Personal injury/ material damage due to
tilting or falling of the product because of
non-observance of the stated tightening
torques
B C
G
Observe the specified tightening torques. Fix the product to components with adequate
load-bearing capacities only. If no tightening torques are stated, apply tightening tor-
ques according to the screw size characteristics for 8.8 screws.
Personal injury/ material damage due to
electric shock in case of damage to the
connection cable
B C D E F G H
Check the connection cable with regard to damages before the first usage and then at
regular intervals. Do not mount cable to moving parts or friction points. If this cannot
be avoided, use spring coils respectively protective conduits.
Personal injury/ damage to material due
to spilled or leaked lubricant
B C D
F G H K
Be careful when filling the reservoir and when connecting or disconnecting lubricant
feed lines. Always use suitable hydraulic screw connections and lubrication lines for the
stated pressures. Do not mount lubrication lines to moving parts or friction points. If
this cannot be avoided, use spring coils respectively protective conduits.
Damage to the control pcb when setting
the DIP switches with inappropriate tool
C D
G
Use appropriate tools. Exercise special care when setting the DIP switches
Life cycles:
A = transport, B = installation, C = initial start-up, D = operation, E = cleaning, F = maintenance, G = fault, repair, H = shutdown
K = Disposal
