EN
10. Maintenance
- 46 -
951-171-010
Version 06
10. Maintenance
Regular and appropriate maintenance is a prerequisite to detect and clear faults in time.
As it is not possible for us to exactly define the operating conditions, we cannot indicate any definite deadlines. The specific timelines have
to be determined, verified at regular intervals and adapted, if necessary, by the operator based on the local operating conditions. If needed,
copy the table for regular maintenance activities.
Maintenance check list
Activity to be done
YES
IP
Electrical connection carried out correctly.
Mechanical connections carried out correctly
The performance data of the previously indicated connections correspond to the specifications stated in the Technical data.
All components, such as lubrication lines and metering devices, have been correctly installed.
Product protected with adequate pressure relief valve
No visible damage, contamination and corrosion
Any dismantled protection and monitoring equipment has been reassembled and checked for correct function
All warning labels on the product are available and in proper condition.
No unusual noises, vibrations, accumulation of moisture, or odours present
No unwanted escape of lubricant from connections
Lubricant is supplied free from bubbles.
Bearings and friction points to be lubricated are provided with the planned amount of lubricant.
Earthing cable fully present, properly connected and electrically conductive.
