Authorized personnel
•
The installation and first start of operation may only be conducted
by qualified personnel.
•
Work on the electrical system may only be performed by profes-
sional electricians.
Electric shock and moving parts hazards
Serious injury or death can be caused by touching live electrical
components and by unexpected movement of the telescopic pillar.
Be sure the system’s power supply is off and the device is
locked out before installing.
W A R N I N G
Danger if restarted without authorization
When correcting faults there is risk of the energy supply being
switched on without authorization. This poses a life threatening
hazard for persons in the danger zone.
Therefore:
•
Prior to starting work, switch off the system and be sure it is
locked out.
W A R N I N G
Installation adjacent to other equipment
The device should not be installed adjacent to or stacked with
other equipment. If adjacent or stacked use is necessary, the
device should be trialled under observation, to verify normal
operation in the configuration in which it will be used.
W A R N I N G
6 Installation and first
operation
Special precautions regarding EMC
The device requires special precautions regarding EMC and
must be installed and put into service according to the EMC
information provided in this operating manual (Safety,
page 12
)
W A R N I N G
29
www.lmotion.ru
Тел
.: (495)-921-34-60
