Installation and first operation
3
Insert DIN-8 plug (
3
) into the connecting socket (
1
) of the control
unit. Ensure correct positioning of the groove (
2
) and the lug (
4
)
(
†
fig. 3
).
1
3
4
2
Fig. 9
Connecting flying leads cable to connector or external control unit
1
Follow the color coding of the leads defined in the technical details
section.
2
Ensure that the control unit complies with the requirements for
external control units defined in this operating manual.
6.5 Connection to operating
element
6.6 Connection to power supply
1
Connect telescopic pillar to control unit (
†
Chapter 6.4
Connec-
tion to the Control Unit
,
page 34
).
2
Connect control unit to mains power supply (
†
Separate operat-
ing manual for control unit
).
3
Ensure that the plug of the power line is accessible at all times.
!
Note!
Operational conditions are not displayed on CPMT tele-
scopic pillars. However, this feature is mandatory in medical
applications and must be present on the control unit being used.
!
Note!
A control unit connects the device to the electric power
supply via a low voltage plug. Follow the control unit’s operating
manual instructions during the connection process.
36
www.lmotion.ru
Тел
.: (495)-921-34-60
