Safety
2.8 Manufacturer’s declaration of
EMC compliance
IEC/EN 60601-1-2:2007 Medical Electrical Equipment
Part 1-2: General requirements for safety
Additional standard: Electromagnetic
compatibility-requirements and tests
Guidance and manufacturer’s declaration – electromagnetic emissions (Table 1 - IEC 60601-1-2)
The telescopic pillar CPMT is intended for use in the electromagnetic environment specified below. The customer or user of
the telescopic pillar should ensure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment – guidance
RF emissions CISPR 11
Group 1
The telescopic pillar CPMT uses only RF energy for internal function.
Therefore, RF emissions are very low and not likely to cause any
interference with nearby electronic equipment.
RF emissions CISPR 11
Class B
Harmonic emissions
IEC 61000-3-2
Class A
The telescopic pillar CPMT is suitable for use in all establishments,
including domestic establishments and those directly connected to
the public low-voltage power supply network that supplies buildings
used for domestic purposes.
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
12
www.lmotion.ru
Тел
.: (495)-921-34-60
