If exterior transport damage is evident:
•
Do not accept delivery or do so only under agreed conditions.
•
Record scope of damage on the transport documents or bill of
delivery of the shipping company.
•
Initiate complaint.
5.3 Return to the manufacturer
If device is damaged, arrange for return transport as follows:
1 Dismantle the device if necessary (
†
Chapter
Dismantling
,
page 50
).
2 Pack device in its original packaging. Follow storage conditions
(
† Chapter
Storage
,
page 28
).
3 Send to manufacturer. Contact SKF service to obtain a shipment
address.
5.4 Packaging
Requirements:
All parts are packaged appropriately for anticipated transport condi-
tions, using only environmentally-friendly packaging materials.
The packaging is intended to protect the individual components
from damage caused during transport, or by corrosion and other
potential hazards, until the components are ready for installation.
Only remove packaging shortly before installation. The packaging
should not be destroyed, but kept for possible return shipment to
the manufacturer (
†
Chapter 5.3
).
If the packaging is to be disposed of, please note and adhere to
the following:
!
Note!
Report any damage as soon as possible, as damage
claims can only be submitted within the transporter’s applicable
complaint period.
!
Note!
Environmental damage due to incorrect disposal
Packaging material consists of valuable raw materials, much of
which can effectively be recycled and reused.
Therefore:
•
Dispose of packaging material in an environmentally correct
way
•
Comply with locally applicable disposal regulations.
27
www.lmotion.ru
Тел
.: (495)-921-34-60
