10.1 Dismantling
The telescopic pillar CPMT is to be removed from service in the fol-
lowing sequence:
1
De-energize the CPMT by unplugging the cable from the external
control unit.
2
Secure the elements of the application in such a way that there is
no pulling or pushing force resting on the CPMT.
3
Dismantle the CPMT from the application.
3.1
Ensure there is no pressure acting on the pillar and the inner
tube.
3.2
Loosen and remove the fastening screws.
3.3
Separate the telescopic pillar CPMT from the mounting points
in the application.
4
Clean the device.
5
Carefully package for shipment to the manufacturer.
10.2 Disposal
Provided that no take-back or disposal agreement has been put in
place, disassembled components should be recycled.
•
Dispose of metals and plastic components at an appropriate recy-
cling centre.
•
Sort remaining components based on the respective materials
and dispose of according to applicable local occupational health
and environmental regulations.
The local municipal authorities or specialized waste management
companies can provide information concerning environmentally
appropriate disposal.
!
Note!
Damage can be caused to the environment by
incorrect disposal
Electronic waste, electronic components, lubricants and other
additives are subject to special waste treatment regulations and
may only be disposed of by approved specialized companies.
51
www.lmotion.ru
Тел
.: (495)-921-34-60
