Simrad SL 30, Manual

Page: 155 / 224

SL 30/35 Hull Sonar Operators Manual 974-25007001/2.0
Installation, Start-Up and Test Page 6.7
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
1/2 1/3
Small Vessel Tank Location
Water line
Hull Tank
Water line
Hull Tank
Within 1 meter from the keel
Fin
For small vessels, a high water pressure is created in the tank because of the
resistance at the rear of the tank well. To solve this problem, attach a “Fin” to the
hull at the location shown in the above figure. The “Fin” height should be approx.
1.5cm. This Fin will provide a smooth stream of water into the retraction tank
6.3.2 Mounting the Transceiver unit
The transceiver is generally mounted on the tank flange. Special mounting pads and
screws are supplied to fasten the transceiver. Provision is also made to bulkhead
mount the transceiver unit. Note that a maximum cable length between the hull unit
to the transceiver is 5.1 meters. You must order the proper hull unit if you plan to
bulkhead mount the transceiver unit.
6.3.3 Mounting the Lower and Raise Hoist Unit
The Lower and Raise Hoist unit is a self-contained hydraulic system. A mounting