Simrad SL 30, Manual

Page: 153 / 224

SL 30/35 Hull Sonar Operators Manual 974-25007001/2.0
Installation, Start-Up and Test Page 6.5
Kongsberg Simrad Mesotech Ltd.
Port Coquitlam, BC - Canada
6.2.4 Connecting the Processor
Mount the SL 30/35 Processing unit with easily accessible power outlet and enough
space for the display, keyboard, mouse, printer, and any other accessories. The
connectors are shaped to go in one way only.
Note: Fixing brackets are supplied with the processing unit.
6.2.5 Connecting the Operating/Interface unit
The SL 30/35 system is supplied with a HP-PC (COMPAQ) Processing unit. Power
must be turned on separately. A separate ON/Off Power Buttons is located on the
Operating control panel.
6.2.6 Connecting DGPS
Connect the DGPS NMEA 183 output to the COM 2 port at the rear of the processing
unit. Interconnect cable not supplied. See Part 4, paragraph 4.59.22.2 “Sensor Ports
Configuration.
The pin connections for your DGPS input/output PC/RS232 are as follows:
•
Pin number “2” RS-232 Rx
•
Pin number “3” RS-232 Tx
•
Pin number “5” GND.
6.2.7 Network LAN Connection
Your SL 30/35 comes equipped with a Network LAN interface adapter card. The LAN
adapter supports both 10Mbit/s and 100Mbit/s operations and automatically detects
which network type is being used. The RJ-45 plugs into your SL 30/35 optional remote
workstation. LAN cables are not supplied with the system.
For additional information, please refer to the User’s Guide supplied with the system.
Warning!
Before applying the power to the processing unit, ensure that the
proper AC or DC input voltage has been selected.