52 Using the microSD Card
Inserting a microSD Card
1.
Gently flip open the tab labelled “microSD” on the side of the device.
2.
Gently insert the microSD card (label facing up) into the slot on the side of the device, until the
microSD card clicks into place.
Note:
If your microSD card has not been formatted, or is in a format that your computer does not recognize,
you may be prompted to format the microSD card. The formatting procedure erases all the data on
the microSD card, after which the files CANNOT be retrieved. To prevent the loss of important data,
please check the contents before you format the microSD card.
3.
Check the status of the microSD card. See “microSD Card Information and Settings” on page 45.
Removing a microSD Card
1.
Ensure you and other users have completed any file transfers.
2.
Gently flip open the tab labelled “microSD” on the side of the device.
3.
Using your fingernail or a thin blunt object, gently press the microSD card in and then release; it
should partially pop out of its slot, as shown in the drawing above.
4.
Remove the microSD card and store it in a safe place.
5.
Close the tab over the microSD slot of the device.
Summary of Contents for AirCard W801
