120 Logs
Exporting System Events
1.
Log in to the home page.
2.
Click the
Advanced Settings
button.
3.
Select
Device > Log
.
4.
Ensure
System events
is set to
Enable
.
5.
Click the
Export
button.
Clearing the System Events Log
1.
Log in to the home page.
2.
Click the
Advanced Settings
button.
3.
Select
Device > Log
.
4.
Ensure
System events
is set to
Enable
.
5.
In the
System events
area, click the
Clear log
button.
Setting the Method Used for Time Acquisition
Time information is stored in the connection history log and system events log.
To set the method used for obtaining the time:
1.
Log in to the home page.
2.
Click the
Advanced Settings
button.
3.
Select
Device > Log
.
4.
From the
Time acquisition method
drop-down list, select
CDMA
or
NTP
.
䡲
CDMA
— Time information is obtained from the CDMA (3G) network; this is more accurate than
NTP, but requires CDMA (3G) coverage.
䡲
NTP
— The Overdrive 3G/4G Mobile Hotspot’s clock is synchronized to a Network Time
Protocol server on the Internet; not as accurate as when using the
CDMA
setting, but doesn’t
require CDMA (3G) coverage. Use this setting if you have 4G but no 3G coverage.
Summary of Contents for AirCard W801
