Sierra Wireless AirCard W801, User Manual

Page: 152 / 164

146 Regulatory Notices
Section 6B
Regulatory Notices
The design of the AirCard W801 device complies with U.S. Federal Communications Commission
(FCC) guidelines respecting safety levels of radio frequency (RF) exposure for mobile devices, which
in turn are consistent with the following safety standards previously set by U.S. and international
standards bodies:
●
ANSI / IEEE C95.1-1999, IEEE Standard for Safety Levels with Respect to Human Exposure to Radio
Frequency Electromagnetic Fields, 3kHz to 300 GHz
●
National Council on Radiation Protection and Measurements (NCRP) Report 86, ?1986, Biological
Effects and Exposure Criteria for Radio Frequency Electromagnetic Fields
●
International Commission on Non-Ionising Radiation Protection (ICNIRP) 1998, Guidelines for
limiting exposure to time-varying electric, magnetic, and electromagnetic fields (up to 300 GHz)
FCC ID
: N7N-MHS801.
RF Exposure - This device is only authorized for use in a mobile application. At least 20 cm (8 inches)
of separation distance between the AirCard W801 device and the user’s body must be maintained at
all times.
WARNING (EMI) - United States FCC Information
- This equipment has been tested and found to
comply with the limits for a Class B computing device peripheral, pursuant to Parts 15 and 27 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment and receiver.
●
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Parts 15 and 27 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.