manualshive.com logo in svg

Siemens SITRANS L Series, Operating Instructions Manual, Page: 37 / 106

Share
Download
Siemens SITRANS L Series Operating Instructions Manual Download Page 37

Setup with the integrated HMI
7.2 Structure and views of the display

Setting

Description

P8

STEMP

Electronics temperature

a

If the mode of operation is set accordingly

b

If the mode of operation is set accordingly

Note

If the measured value cannot be shown in the display, " 

99999

"

 appears flashing. 

In

 

this case the selected unit or scaling must be adapted.

Parameter view

The parameter view shows the parameters, parameter values and the wizards of the

device.

  1  

Parameter name

  2  

Parameter value

  3  

Parameter number

  4  

EDIT" symbol (permanently activated)

Figure 7.4

Parameter view

Editing view

Parameter values can be changed in this view. Wizards are available for certain

parameters.

Note

While the device is in the editing view, the output remains active and continues to

respond to changes.

  1  

Parameter name

  2  

Unit of the measured value (no. 1 and 2 are displayed alternately)

  3  

Arrows for scrolling (only within an option list)

  4  

Parameter number

28

SITRANS LR150

Operating Instructions, 08/2020, 

A5E50352155

Summary of Contents for SITRANS L Series











































































































Reviews:

No comments