Siemens SITRANS FEC920, User Manual

Page: 133 / 247

FEC920: USER GUIDE
Page 125 September 18
Parameter path Description Type Hex Dec Resolution
Channel.2.Main.RangeHigh Range high value float32 1888 6280 Set by Channel.2.Main.Resolution
Channel.2.Main.RangeLow Range low value float32 1887 6279 Set by Channel.2.Main.Resolution
Channel.2.Main.RangeUnits Range units (as channel.1.Main) uint8 1889 6281 Not applicable
Channel.2.Main.Resolution Specifies the resolution/number of decimal places uint8 1881 6273 Not applicable
Channel.2.Main.ScaleHigh Scale high value float32 188b 6283 Set by Channel.2.Main.Resolution
Channel.2.Main.ScaleHigh2 Scale high value for the secondary input float32 189b 6299 Set by Channel.2.Main.Resolution
Channel.2.Main.ScaleLow Scale low value float32 188a 6282 Set by Channel.2.Main.Resolution
Channel.2.Main.ScaleLow2 Scale low value for the secondary input float32 189a 6298 Set by Channel.2.Main.Resolution
Channel.2.Main.SensorBreakType Sensor break type (as for Channel.1.Main) uint8 188f 6287 Not applicable
Channel.2.Main.SensorBreakVal Sensor break value uint8 1891 6289 Not applicable
Channel.2.Main.Shunt Shunt value in Ohms float32 1885 6277 2dp
Channel.2.Main.Status Channel status (as for Channel.1.Main.Status) uint8 0105 261 Not applicable
Channel.2.Main.Status2 The secondary input PV (output) status (as above) uint8 0115 277 Not applicable
Channel.2.Main.TestSignal Channel test waveform (as for Channel.1.Main) uint8 1882 6274 Not applicable
Channel.2.Main.Type Channel function (as for Channel.1.Main.Type) uint8 1880 6272 Not applicable
Channel.2.Main.Units Channel units string string_t 4930 18736 Not applicable
Channel.2.Trend.Colour Trend colour (as for Channel.1.Trend.Colour) uint8 18a0 6304 Not applicable
Channel.2.Trend.SpanHigh Specifies the highest PV (output value) to be displayed float32 18a2 6306 Same as Channel.2.Main.PV
Channel.2.Trend.SpanLow Specifies the lowest PV (output value) to be displayed float32 18a1 6305 Same as Channel.2.Main.PV
Channel.3.Alarm1.Acknowledgement 1 = alarm acknowledged bool 1950 6480 Not applicable
Channel.3.Alarm1.Active 1 = alarm source active, or safe but not ack’d bool 194b 6475 Not applicable
Channel.3.Alarm1.Amount Rate-of-change alarm ‘Amount’ float32 1948 6472 Same as Channel.3.Main.PV
Channel.3.Alarm1.AverageTime Rate-of-change alarm ‘Average time’ time_t 194a 6474 Set by Network.Modbus.TimeFormat
Channel.3.Alarm1.Block 0 = Blocking alarms off; 1 = Blocking alarms on. uint8 1942 6466 Not applicable
Channel.3.Alarm1.ChangeTime Rate-of-change alarm ‘Change Time’ uint8 1949 6473 Not applicable
Channel.3.Alarm1.Deviation Deviation alarm ‘Deviation Value’ float32 1947 6471 Same as Channel.3.Main.PV
Channel.3.Alarm1.Dwell Alarm dwell time time_t 1945 6469 Set by Network.Modbus.TimeFormat
Channel.3.Alarm1.Hysteresis Alarm hysteresis value float32 1944 6468 Same as Channel.3.Main.PV
Channel.3.Alarm1.Inactive 1 = alarm source safe and ack’d (if necessary) bool 194e 6478 Not applicable
Channel.3.Alarm1.Inhibit 1 = alarm inhibited bool 1951 6481 Not applicable
Channel.3.Alarm1.Latch Alarm latch type (as for Channel.1.Alarm1) uint8 1941 6465 Not applicable
Channel.3.Alarm1.NotAcknowledged 1 = alarm has not been acknowledged bool 194f 6479 Not applicable
Channel.3.Alarm1.Reference Deviation alarm ‘Reference’ value float32 1946 6470 Same as Channel.3.Main.PV
Channel.3.Alarm1.Status Alarm status (as for Channel.1.Alarm1) uint8 010a 266 Not applicable
Channel.3.Alarm1.Threshold Alarm trigger threshold float32 1943 6467 Same as Channel.3.Main.PV
Channel.3.Alarm1.Type Alarm type (as for Channel.1.Alarm1) uint8 1940 6464 Not applicable
Channel.3.Alarm2.Acknowledge 1 = acknowledge alarm bool 01b5 437 Not applicable
Channel.3.Alarm2.Acknowledgement 1 = alarm acknowledged bool 1970 6512 Not applicable
Channel.3.Alarm2.Active 1 = alarm source active, or safe but not ack’d bool 196b 6507 Not applicable
Channel.3.Alarm2.Amount Rate-of-change alarm ‘Amount’ float32 1968 6504 Same as Channel.3.Main.PV
Channel.3.Alarm2.AverageTime Rate-of-change alarm ‘Average time’ time_t 196a 6506 Set by Network.Modbus.TimeFormat
Channel.3.Alarm2.Block 0 = Blocking alarms off; 1 = Blocking alarms on. uint8 1962 6498 Not applicable
Channel.3.Alarm2.ChangeTime Rate-of-change alarm ‘Change Time’ uint8 1969 6505 Not applicable
Channel.3.Alarm2.Deviation Deviation alarm ‘Deviation Value’ float32 1967 6503 Same as Channel.3.Main.PV
Channel.3.Alarm2.Dwell Alarm dwell time time_t 1965 6501 Set by Network.Modbus.TimeFormat
Channel.3.Alarm2.Hysteresis Alarm hysteresis value float32 1964 6500 Same as Channel.3.Main.PV
Channel.3.Alarm2.Inactive 1 = alarm source safe and ack’d (if necessary) bool 196e 6510 Not applicable
Channel.3.Alarm2.Inhibit 1 = Alarm inhibited bool 1971 6513 Not applicable
Channel.3.Alarm2.Latch Alarm latch type (as for Channel.1.Alarm1) uint8 1961 6497 Not applicable
Channel.3.Alarm2.NotAcknowledged 1 = alarm has not been acknowledged bool 196f 6511 Not applicable
Channel.3.Alarm2.Reference Deviation alarm ‘Reference’ value float32 1966 6502 Same as Channel.3.Main.PV
Channel.3.Alarm2.Status Alarm status (as for Channel.1.Alarm1) uint8 010b 267 Not applicable
Channel.3.Alarm2.Threshold Alarm trigger threshold float32 1963 6499 Same as Channel.3.Main.PV
Channel.3.Alarm2.Type Alarm type (as for Channel.1.Alarm1) uint8 1960 6496 Not applicable
Channel.3.Main.CJType Cold junction compensation type (as for Channel.1.Main) uint8 190c 6412 Not applicable
Channel.3.Main.CloseString Close String string_t 49a2 18850 Not applicable
Channel.3.Main.Descriptor Text string to describe the channel string_t 4936 18742 Not applicable
Channel.3.Main.ExtCJTemp External CJ temperature float32 190d 6413 1dp
Channel.3.Main.FaultResponse Input fault response (As for Channel.1.Main) uint8 1910 6416 Not applicable
Channel.3.Main.Filter Filter time constant float32 190e 6414 1dp
Channel.3.Main.InputHigh Input range maximum value float32 1904 6404 1dp
Channel.3.Main.InputLow Input range minimum value float32 1903 6403 1dp
Channel.3.Main.InternalCJTemp Channel internal cold junction temperature float32 1915 6421 1dp
Channel.3.Main.IPAdjustState Input Adjust state (0 = Unadjusted; 1 = Adjusted) bool 1916 6422 Not applicable
Channel.3.Main.IPAdjustState2 Secondary Input Adjust state (0 = Unadjusted; 1 = Adjusted) bool 191c 6428 Not applicable
Channel.3.Main.LinType Linearization type (as for Channel.1.Main.LinType) uint8 1906 6406 Not applicable
Channel.3.Main.MeasuredValue Input value before linearization, scaling, adjust etc. float32 1914 6420 Set by Channel.3.Main.Resolution
Channel.3.Main.MeasuredValue2 Measured value of the secondary input float32 1919 6425 Set by Channel.3.Main.Resolution
Channel.3.Main.Offset Input offset float32 1917 6423 3dp
Channel.3.Main.Offset2 Secondary input offset float32 1918 6424 3dp
Channel.3.Main.OpenString Open String string_t 497e 18814 Not applicable
Channel.3.Main.PV The output (displayed) value of the channel. float32 0108 264 Set by Channel.3.Main.Resolution
Channel.3.Main.PV2 The secondary input process variable (output) of the channel float32 0118 280 Set by Channel.3.Main.Resolution
Channel.3.Main.RangeHigh Range high value float32 1908 6408 Set by Channel.3.Main.Resolution
Channel.3.Main.RangeLow Range low value float32 1907 6407 Set by Channel.3.Main.Resolution
Channel.3.Main.RangeUnits Range units uint8 1909 6409 Not applicable
Channel.3.Main.Resolution Specifies the resolution/number of decimal places uint8 1901 6401 Not applicable
Channel.3.Main.ScaleHigh Scale high value float32 190b 6411 Set by Channel.3.Main.Resolution
Channel.3.Main.ScaleHigh2 Scale high value for the secondary input float32 191b 6427 Set by Channel.3.Main.Resolution
Channel.3.Main.ScaleLow Scale low value float32 190a 6410 Set by Channel.3.Main.Resolution
A5E45696052A Rev-AA