Siemens SIMATIC S5-115F, User Manual

Page: 66 / 421

Installation Guidelines S5-115F Manual
Switch and jumper settings on the IM 304 interface module in the case of distributed
configurations
Figure 3-23 shows switch and jumper positions on the IM 304 module. If you use the IM 304
interface module for distributed configurations, please adopt the jumper settings shown on
jumper block X11.
All toggles must be in the ON position on the S3 switch.
Figure 3-23. Switch and Jumper Settings on the IM 304-3UB11 for Distributed Configurations
X15
X3
a a a a a a
a a a a a a
a a a a a a
a a a a a a
a a a a a a
X2
1 2
a a a a a a
a a a a a a
a a a a a a
a a a a a a
X1
a a
a a
a a
a a
a a
a a
a a
1
2
3
X13
a a a a a a
a a a a a a
a a a a a a
X12 a a
a a
a a
3
a a a a
a a a a
a a a a
a a a a
a a a a
a a a a
ON
OFF
a a a a a
a a a a a
a a a a a
a a a a a
a a a a a
a a a a a
ON
OFF
a a a a a a a a a
a a a a a a a a a
a a a a a a a a a
a a a a a a a a a
OFF ON
a a a a
a a a a
a a a a
a a a a
S3
a a
a a
a a
a a
a a
a a
a a
a a
a a
a a
a a
a a
a a
1
2
3
a a a a a a a
a a a a a a a
a a a a a a a
a a a a a a a
9 7 5 3 1
X11
a a a a a a a a
a a a a a a a a
a a a a a a a a
a a a a a a a a
a a a a a a a a
10 8 6 4 2
X21
X22
a a a a a
a a a a a
a a a a a
a a a a a
X14
LED2
LED1
X4
IM 304
In Figure 3-23, the IM 304 has been set for distributed configuration.
•
Permissible cable length up to 100 m (328 ft.) (X11)
• The PLC evaluates the PEU CPU signal if one interface signals ”not ready” (X14)
• The PLC evaluates the PEU (I/O module not ready) CPU signal (X15)
• Both interfaces are switched on (X21 and X22)
You can change the settings of jumpers X21, X22 and X11, X14 and X15.
•
You can switch the interfaces on or off with jumpers X21 and X22.
X21
or
X22
ON
OFF
Interface switched on
Interface switched off
(no EU connected via this interface).
ON
OFF
3-24
EWA 4NEB 811 6148-02