manualshive.com logo in svg

Siemens SIMATIC S5-115F, User Manual

The Siemens SIMATIC S5-115F brings powerful automation capabilities to your industrial applications. This user-friendly product requires a comprehensive User Manual for optimal utilization, and you can conveniently download it for free from manualshive.com. Unlock the full potential of your Siemens SIMATIC S5-115F with our easily-accessible, detailed manual.

Share
Download
background image

S5-115F Manual 

 Rules Governing the Use of the S5-115F

10.13

I/O Type Assignment of Unused Digital Words

32-bit DI/DQ modules require two I/O words. You must define the I/O type for each I/O word. This
must also be done for an I/O word even if you do not use the relevant bits. Assign the unused I/O
words to the simplest I/O type.

Table 10-6.   Typical I/O Type Assignments of Unused I/O Words of 32-Channel DI/DQ Modules

Module

Used as

I/O type of the free word

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

DI 430 

DI 430 

DI 430 

DQ 451 

DQ 451 

Type 1 I/O

Type 3 I/O

Type 8 I/O

CH DQ for type 3 I/O

Type 1 I/O

Type 3 I/O

Type 8 I/O

Type 8 I/O

Type 2 I/O

Type 2 I/O

10.14

I/O Type Assignment of Unused Analog Channels

You must assign an I/O type to each channel of an AI/AQ module. Assign the simplest I/O type to
the unused channels.

Table 10-7.   Typical I/O Type Assignments of Unused Channels of AI/AQs

Module

Used as

I/O type of the free channel

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a

AI 460

AI 463

AI 463

AI 463

AI 463

Type 13 I/O

Type 14 I/O

Type 15 I/O

Type 16 I/O

Type 13 I/O

Type 16 I/O

Type 16 I/O

Type 16 I/O

AQ 470

Type 18 I/O

Type 18 I/O

Type 13 I/O

Type 13 I/O

Note

The current or voltage inputs of unused AI channels must be short-circuited.

EWA 4NEB 811 6148-02

10-51

Summary of Contents for SIMATIC S5-115F






































































































































































































































































































































































































































Reviews:

No comments

Related manuals for SIMATIC S5-115F

ZKTeco SC800 User Manual preview
SC800
Brand: ZKTeco Pages: 123
NEC 78K0S/KA1+ Preliminary User'S Manual preview
78K0S/KA1+
Brand: NEC Pages: 304
2gig Technologies GC3 Manual preview
GC3
Brand: 2gig Technologies Pages: 4
2gig Technologies GC3 Quick Start Manual preview
GC3
Brand: 2gig Technologies Pages: 2
G1SLE MK2 Alignment Manual preview
MK2
Brand: G1SLE Pages: 2
Valor Plus Instructions Manual preview
Plus
Brand: Valor Pages: 20
Dahua NKB User Manual preview
NKB
Brand: Dahua Pages: 58
National Instruments sbRIO-9629 Quick Reference Manual preview
sbRIO-9629
Brand: National Instruments Pages: 2
Oceanic Systems 5980 User Manual preview
5980
Brand: Oceanic Systems Pages: 8
Parkside PDWE 8 A1 Instructions Manual preview
PDWE 8 A1
Brand: Parkside Pages: 86
Patron TOM 5 Information For Use preview
TOM 5
Brand: Patron Pages: 36
WAGNER 2K COMFORT Original Operating Manual preview
2K COMFORT
Brand: WAGNER Pages: 128
S&P PDS CONTROL Series Manual preview
PDS CONTROL Series
Brand: S&P Pages: 32
Soundoff Signal nERGY bluePRINT ENGCP15001 Programming Manual preview
nERGY bluePRINT ENGCP15001
Brand: Soundoff Signal Pages: 5
Telit Wireless Solutions ZE60-2.4 User Manual preview
ZE60-2.4
Brand: Telit Wireless Solutions Pages: 45
YOKOGAWA UP150 Instruction Manual preview
UP150
Brand: YOKOGAWA Pages: 33
schmersal AES 1175 Operating Instructions Manual preview
AES 1175
Brand: schmersal Pages: 6
Daikin IOM 1177-1 Installation Operation & Maintenance preview
IOM 1177-1
Brand: Daikin Pages: 8

Brands by name

Popular brands

Load more brands