Table 3-10
Server module and power bus cover
Function
Figure
Server module and power bus cover complete the configuration of
the IO device.
The power bus cover is used to protect the power bus contacts.
Table 3-11
Coding element (for terminal block)
Function
Figure
There is a mechanical coding element for the ET 200SP HA distrib‐
uted I/O system. This element encodes the type of the installed I/O
module.
You can find additional information on this in the section "Replacing
an I/O module with another type (Page 123)".
Component for the supply voltage
You can find information on suitable components on the Internet (
support.industry.siemens.com/cs/ww/en/view/9172884
):
Interactive Catalog CA01;
Automation and Drives
System overview
3.2 Basic components of the IO device
ET 200SP HA Distributed I/O system
20
System Manual, 08/2019, A5E39261167-AD
Summary of Contents for SIMATIC ET 200SP HA
Page 6: ...Table of contents ET 200SP HA Distributed I O system 6 System Manual 08 2019 A5E39261167 AD ...
Page 181: ...Glossary ET 200SP HA Distributed I O system System Manual 08 2019 A5E39261167 AD 181 ...
Page 182: ...Glossary ET 200SP HA Distributed I O system 182 System Manual 08 2019 A5E39261167 AD ...
