Siemens MOTOX BA 2010, Operating Instructions Manual

Page: 65 / 124

Service and maintenance
8.2 Checking and changing lubricants
BA 2010
Operating Instructions, 02/2018, A5E38093846A/RS-AC
63
Gearbox type Distance "x"
[mm]
B3 B6 B7 B8 V5 V6
E38 43 37 37 31 23 19
Z38 93 83 83 83 75 32
D38 89 82 82 82 52 35
B3-00
H-01
B8-00
H-02
B7-00
H-03
B6-00
H-04
V5-00
H-05
V6-00
H6
B, BA, BAS, BAT38 126 74 30 89 95 112
K, KA, KAS, KAT38 64 35 21 52 40 46
B5-01
H-01
B5-03
H-02
B5-02
H-03
B5-00
H-04
V1-00
H-05
V3-00
H-06
B.38 126 74 30 89 95 112
K.38 66 40 20 54 45 50
FZ.38B 137 152 137 137 87 73
FD.38B 110 147 132 132 110 65
8.2.3 Checking the oil level using the oil sight glass (optional)
If there is an oil sight glass to check the oil level
①
, the oil must be visible in the center of
the sight glass when the oil is cool. When the oil is hot, the oil level
①
is above the center of
the sight glass. The oil level
①
of cold oil is below the center of the sight glass.
Figure 8-4 Oil level in the oil sight glass
Top up the oil level
①
if necessary, and check it again.
8.2.4 Checking the oil level using the oil dipstick (optional)
To check the oil level, push the dipstick into the hole but do not screw it in.
The oil level must be between the lower and upper marks on the oil dipstick.
If you are using the electric oil level monitoring system, the oil must be level with the
upper mark on the oil dipstick.
Rectify the oil level if necessary and check it again.