Siemens MOTOX BA 2010, Operating Instructions Manual

Page: 120 / 124

Explanations
12.2 EU Declaration of Conformity DIN EN 80079-36
BA 2010
118
Operating Instructions, 02/2018, A5E38093846A/RS-AC
12.2 EU Declaration of Conformity DIN EN 80079-36
Document No. A5E43968684AA
Manufacturer: Siemens AG
Division Digital Factory DF MC
Address: Bahnhofstraße 40, 72072 Tübingen, Germany
Product designation: MOTOX gearbox series
Gearbox types:
E, Z, D, F, B, K, C
Sizes: 18 - 208
Input units: A, K, P
The designated product complies with the regulations of the following European Directive:
Directive 2014/34/EU, OJ L 96/309, 29.3.2014, of the European Parliament and of the
Council of 26 February 2014 on the harmonisation of the laws of the Member States relating
to equipment and protective systems intended for use in potentially explosive atmospheres.
Conformance with the regulations laid down in these Directives is proven by fully complying
with the following standards:
•
DIN EN 1127-1: 2011
•
DIN EN 80079-36: 2016
•
DIN EN 80079-37: 2016
•
DIN EN 80079-34: 2012
•
DIN EN 60079-0: 2014
•
DIN EN 15198: 2007
Type of explosion protection for equipment group II of categories 2 and 3:
•
II 2G Ex h IIB T4 Gb
•
II 2G Ex h IIC T4 Gb
•
II 2D Ex h IIIB T120° C Db
•
II 2D Ex h IIIC T120° C Db
•
II 3G Ex h IIB T4 Gc
•
II 3G Ex h IIC T4 Gc
•
II 3D Ex h IIIB T120° C Dc
•
II 3D Ex h IIIC T120° C Dc
The specific marking of the gearbox is noted on the rating plate.
The technical documentation for Category 2 gearboxes has been subjected to a voluntary
validation. The documentation has been filed with the designated body under No.
0123, TÜV SÜD PRODUCT SERVICE GmbH, Ridlerstraße 65, 80339 München, Germany.
Tübingen, January 22, 2018
Georg Böing
Head of Research & Development
Florian Hanisch
Vice President Lead Factory Simogear