Configuring the wireless AP
A31003-W1040-U101-1-7619, July 2006 DRAFT
92
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_apstartup.fm
Modifying wireless AP settings
●
If applicable, click the
802.11a
tab to modify the radio properties.
●
DTIM Period
– Type the Delivery Traffic Indication Message (DTIM) period. The
default value is 1. This measures the number of beacons in the DTIM cycle.
●
Beacon Period
– Type the time units between beacon transmissions. The default
value is 100 milliseconds.
●
RTS/CTS Threshold
– Type the size of a data unit, which if below, a Request To Send
(RTS)/Clear to Send (CTS) handshake is not performed. The default value is 2346.
●
Frag. Threshold
– Type the maximum size of a packet or data unit that can be
delivered. The default value is 2346.
●
802.11a
– Select to enable the 802.11a radio.
●
802.11j
– Select to enable the 802.11j radio. This radio is only available in Japan.
●
Channel
– Select the wireless channel that the wireless AP will use to communicate
with wireless devices. Depending on the regulatory domain (based on country), some
channels may be restricted. The default value is based on North America. The
Auto
selection allows the wireless AP to select the appropriate channel automatically. For
more information, see
Summary of Contents for HiPath C10
Page 299: ......