hwc_vnsconfiguration.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
161
Virtual Network configuration
Configuring filtering rules for a VNS
The Filtering tab automatically provides a Deny All rule already in place. This rule can be
modified to Allow All, if appropriate to the network access needs for this VNS.
5.
For each filtering rule you are defining, do the following:
●
In the
IP/subnet:port
box, type the destination IP address. You can also specify an IP
range, a port designation, or a port range on that IP address.
●
In the
Protocol
drop-down list, select the applicable protocol. The default is N/A.
6.
Click
Add
. The information appears in the
Filter Rules area of the tab.
7.
Select the new filter, then do the following:
●
If applicable, select
In
to refer to traffic from the wireless device that is trying to get on
the network.
●
If applicable, select
Out
to refer to traffic from the network host that is trying to get to
a wireless device.
●
Select the
Allow
checkbox applicable to the rule you defined.
8.
Edit the order of a filter by selecting the filter and clicking the
Up
and
Down
buttons. The
filtering rules are executed in the order you define here.
9.
To save your changes, click
Save
.
7.6.3.1
Filtering rules by filter ID examples
Below are two examples of possible filtering rules for a filter ID. The first example disallows
some specific access before allowing everything else.
The second example does the opposite of the first example. It allows some specific access and
denies everything else.
In
Out
Allow IP / Port
Description
x
x
*.*.*.*:22-23
SSH and telnet sessions
x
x
[specific IP address, range] Deny all traffic to a specific IP address or
address range
x
x
x
*.*.*.*.
Allow everything else
Table 9
Filtering rules by filter ID example A
In
Out
Allow IP / Port
Description
x
x
x
[specific IP address, range] Allow traffic to a specific IP address or
address range.
Table 10
Filtering rules by filter ID example B
Summary of Contents for HiPath C10
Page 299: ......
