Virtual Network configuration
A31003-W1040-U101-1-7619, July 2006 DRAFT
162
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_vnsconfiguration.fm
Configuring filtering rules for a VNS
7.6.4
Filtering rules for a default filter
After authentication of the wireless device user, the default filter will apply only after:
●
No match is found for the Exception filter rules.
●
No filter ID attribute value is returned by the authentication server for this user.
●
No match is found on the HiPath Wireless Controller for a filter ID value.
The final rule in the default filter should be a catch-all rule for any traffic that did not match a
filter. A final Allow All rule in a default filter will ensure that a packet is not dropped entirely if no
other match can be found. VNS Policy is also applicable for Captive Portal and MAC-based
authorization.
To define the filtering rules for a default filter
1.
From the main menu, click
Virtual Network Configuration
. The Virtual Network
Configuration screen appears.
2.
In the left pane Virtual Networks list, click the VNS you want to define the filtering rules for
a default filter. The Topology tab is displayed.
3.
Click the
Filtering
tab.
4.
From the
Filter ID
drop-down list, select
Default
.
x
x
*.*.*.*.
Deny everything else.
In
Out
Allow IP / Port
Description
Table 10
Filtering rules by filter ID example B
Summary of Contents for HiPath C10
Page 299: ......
