hwc_3rdpartyaps.fm
A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
213
Working with third-party APs
9
Working with third-party APs
You can set up the HiPath Wireless Controller to handle wireless device traffic from third-party
access points, providing the same policy and network access control. This process requires the
following steps:
●
Step 1 – Define a data port as a third party AP port
●
Step 2 – Define a VNS for the third-party AP port
●
Step 3 – Define authentication by captive portal for the third-party AP VNS
●
Step 4 – Define filtering rules for the third-party APs
To set up third-party APs:
Step 1 – Define a data port as a third party AP port
1.
From the main menu, click
Wireless Controller Configuration
. The
Wireless Controller
Configuration
screen appears.
2.
From the left pane, click
IP Address
. The
Management Port Settings and Interfaces
screen appears.
Summary of Contents for HiPath C10
Page 299: ......
