Siemens HiPath C10 User Manual Download Page 166

Page: 166 / 300

Virtual Network configuration

A31003-W1040-U101-1-7619, July 2006 DRAFT

166

HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide

hwc_vnsconfiguration.fm

Enabling multicast for a VNS

To enable the multicast function, click

Enable Multicast Support

Define the multicast groups by selecting one of the radio buttons:

●

IP Group

– Type the IP address range.

●

Defined groups

– Select from the drop-down list.

Click

Add

. The group is added to the list above.

To enable the wireless multicast replication for this group, select the corresponding

Wireless Replication

checkbox.

To modify the priority of the multicast groups, select the group row and click the

Down

buttons.

A Deny All rule is automatically added as the last rule, IP = *.*.*.* and the

Wireless

Replication

checkbox is not selected. This rule ensures that all other traffic is dropped.

To save your changes, click

Save

Summary of Contents for HiPath C10













































































































































































































































































































Search results

Summary of Contents for HiPath C10

Reviews:

Related manuals for HiPath C10

Brands by name

Popular brands

Siemens HiPath C10, User Manual

Search results

Summary of Contents for HiPath C10

Reviews:

Related manuals for HiPath C10

Brands by name

Popular brands