Configuring the HiPath Wireless Controller
A31003-W1040-U101-1-7619, July 2006 DRAFT
60
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide
hwc_startup.fm
Performing the first-time setup of the HiPath Wireless Controller
●
The MTU of the ports on either end of an OSPF link must match. The MTU for ports on the
HiPath Wireless Controller is defined as 1500, in the IP Addresses screen, during data port
setup. This matches the default MTU in standard routers.
To set OSPF Routing Global Settings on the HiPath Wireless Controller:
1.
From the main menu, click
Wireless Controller Configuration
. The
HiPath Wireless
Controller Configuration
screen appears.
2.
In the left pane, click
Routing Protocols
. The
Static Routes
tab appears.
3.
Click the
OSPF
tab.
4.
From the
OSPF Status
drop-down list, select
ON
to enable OSPF.
5.
In the
Router ID
box, type the IP address of the HiPath Wireless Controller. This ID must
be unique across the OSPF area. If left blank, the OSPF daemon automatically picks a
router ID from one of the HiPath Wireless Controller’s interface IP addresses.
6.
In the
Area ID
box, type the area. 0.0.0.0 is the main area in OSPF.
7.
From the
Area Type
drop-down list, select one of the following:
Summary of Contents for HiPath C10
Page 299: ......
