Siemens HiPath C10 User Manual Download Page 237

Page: 237 / 300

hwc_reports.fm

A31003-W1040-U101-1-7619, July 2006 DRAFT
HiPath Wireless Controller, Access Points and Convergence Software V4.0, C10/C100/C1000 User Guide

237

Working with reports and displays

Viewing the displays

To view mobility manager displays:

From the main menu, click

Reports & Displays

. The

List of Displays

screen appears.

Click the appropriate mobility manager display:

●

Client Location in Mobility Zone

●

Mobility Tunnel Matrix

The colored status indicates the following:

●

Green – The mobility manager is in communication with an agent and the data tunnel has
been successfully established.

●

Yellow – The mobility manager is in communication with an agent but the data tunnel is not
yet successfully established.

●

Red – The mobility manager is not in communication with an agent and there is no data
tunnel.

Summary of Contents for HiPath C10













































































































































































































































































































Search results

Summary of Contents for HiPath C10

Reviews:

Related manuals for HiPath C10

Brands by name

Popular brands

Siemens HiPath C10, User Manual

Search results

Summary of Contents for HiPath C10

Reviews:

Related manuals for HiPath C10

Brands by name

Popular brands