Siemens Gigaset 4000 Comfort Operating Instructions Manual Download Page 84

Page: 84 / 116

Operation using a telephone system

Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619

Wahloptionen.fm

4.9.02

Step

step

Setting options

You have the option of switching between

Standard dial

(factory default)

Auto

keypad

and

Dial * and #

settings.

Standard dial

Having switched on,

Standard dial

and

are not transmitted when dialling and

when

and

are entered, the unit does not switch to keypad.

Auto keypad

When

are input, this setting automatically switches signalling to keypad

when dialling. This automatic switching is required for commands to the
switching centre or telephone system.

Dial * and #

When

Dial * and #

are activated, the characters

and

are sent as commands

to the switching centre or telephone system when dialling.

Regardless of the above setting options, the system is automatically switched
to tone dialling (DTMF) when dialling is

complete

, e.g. for telecontrol of an an-

swering machine.

Activating standard dialling (ISDN)

is pressed for menus.

Press [

] and [OK ] to select:

Base Settings

→

Settings

→

System settings

→

Spec. function

→

Dial properties

→

Standard dial

(

before menu item = ON /

none = OFF).

Activating automatic keypad switching

is pressed for menus.

Press [

] and [OK ] to select:

Base Settings

→

Settings

→

System settings

→

Spec. function

→

Dial properties

→

Auto keypad

(

before menu item = ON /

none = OFF).

Activating * and # dialling

is pressed for menus.

Press [

] and [OK ] to select:

Base Settings

→

Settings

→

System settings

→

Spec. function

→

Dial properties

→

Dial * and #

(

before menu item = ON /

none = OFF).

Activating/De-activating the keypad during a call

In addition to the long-term settings described above, you also have the option
of switching temporarily to keypad.

The setting only applies to an ongoing external call and is automatically de-ac-
tivated when the call is finished.

Requirement

: You are currently making a call.

is pressed for menus.

Press [

] and [OK ] to select:

Keypad on?

Enter keypad character sequence (code).

Press [

] and [OK ] to select:

Keypad off?

Summary of Contents for Gigaset 4000 Comfort





















































































































Search results

Summary of Contents for Gigaset 4000 Comfort

Reviews:

Related manuals for Gigaset 4000 Comfort

Brands by name

Popular brands

Siemens Gigaset 4000 Comfort, Operating Instructions Manual

Search results

Summary of Contents for Gigaset 4000 Comfort

Reviews:

Related manuals for Gigaset 4000 Comfort

Brands by name

Popular brands