Siemens Gigaset 4000 Comfort Operating Instructions Manual Download Page 73

Page: 73 / 116

Short messages (SMS)

Gigaset 4110isdn, GBR, A31008-G4110-B102-2-7619

sms.fm

4.9.02

Step

step

Producing an SMS message

Press

for selection menus.

Select using [

] and [OK]:

Text Message

Select using [

] and [OK]:

Write Message

Key in your short message.

Input functions

Use [

] to open the menu.

Saving an SMS message (without sending it)

Produce an SMS message as described on page 72.

Select using

and [OK]:

Save Text

The SMS message will be saved in the outbox list and can be sent later.

Hi Peter, I can’t come to
training today as I’ve got a
dental appointment.

Info

Controlling the cursor in the text field.
Characters can be inserted afterwards to the right of the cursor.

Delete

characters to the left of the cursor.

Enter a single

space

Change over once between

upper/lower case

after a space.

Summary of Contents for Gigaset 4000 Comfort





















































































































Search results

Summary of Contents for Gigaset 4000 Comfort

Reviews:

Related manuals for Gigaset 4000 Comfort

Brands by name

Popular brands

Siemens Gigaset 4000 Comfort, Operating Instructions Manual

Search results

Summary of Contents for Gigaset 4000 Comfort

Reviews:

Related manuals for Gigaset 4000 Comfort

Brands by name

Popular brands